Fenix GL19R is a powerful dual brightness rail mounted light that is ideal for Police, Military and Airsoft use. GL19R is supplied with both Glock (GL) and Picatinny (1913) rail inserts. The light also features a built-in USB-C socket for onboard battery charging and includes a replaceable Fenix ARB-L18-1100P rechargeable battery.
The powerful LED beam offers 3 settings.
An intense 1200 lumen output (210m beam) with a total continuous run time of 1 hour (including thermal step down).
A long duration 350 lumen output (110m beam) with a run time of 2 hours.
A disorienting 1200 lumen strobe
The light is operated by dual rear switches, either of which can be used to select On / Off and Strobe outputs. A lock out mode can be set to prevent accidental operation.
Fenix GL19R features:
* Luminus SFT40 LED
* Fenix 1100mah removable battery
* 2 hour charge time
* USB-C onboard charging socket
* Charging socket accepts Fenix AER-06S remote switch
* Quick release inset lever mount plus rail width adjustment
* Includes Glock and 1913 / Picatinny rail plates
* Fits most Surefire X300U holsters
* Built in Boot-Up battery level and charging indicator
* LED Boot up battery indicator can be disabled for stealth
* 60c intelligent overheat protection
* Fits most full size pistols except Sig P226
* Does not fit compact pistols with rails except Glock 36 and Springfield XDS
* Does not fit sub compact pistols
* Suitable for rifle mounting
Fenix GL19R operation:
* From Off - Press and hold either switch for 0.5 seconds for momentary-on. Release for off.
* From Off - Tap and release either switch for Constant-On. Tap again to switch off.
* During constant- on - hold either switch down more than 0.5sec for Strobe.
Changing brightness settings:
* Hold one button down while pressing the other to cycle between 350 and 1200 lumens.
Lock mode.
* Hold down both buttons for 5 seconds to lock the light (LED blinks twice to indicate locked status).
* In locked mode the battery status / charge level LED will flash red and green after pressing either button to indicate the light is locked.
* Hold both switches for 1 second to unlock the light.
Stealth setting:
In critical situations the boot up battery level LED can be disabled for added stealth.
* Press the switch next to the battery / charge indicator LED 3 times for about half a second each then release each time (just long enough to enter momentary mode). Following the third press and release, press the switch again, this time holding it down. The indicator LED will blink red and is now disabled. Repeat the process to re activate the LED. (The LED will still function as a charging indicator while the battery level indicator is disabled).
Included in the package:
Retail Packaged Fenix GL19R Rechargeable Rail Light
Fenix ARB-L18-1100P 18350 Li-ion Battery
USB-C charging cable
Glock & Picatinny Rail Plates
Spare O-Ring
User Manual
Warranty Card
